It’s also not a bad idea to record the device's MAC address in an easily accessible location if you’re mounting it, as this is required for troubleshooting and is located on the bottom of the base. You’ll also need a 2.4GHz wireless network (5GHz networks are not supported). For one, you’ll need to make sure you have an electrical outlet nearby, as the device isn’t battery powered. Ceiling locations are the most effective, but there are other options too.Getting your Roku Indoor Camera SE installed isn’t too challenging, although there are a lot of factors to consider before starting the process. Also, pull network wires to locations where you will want wireless access points. For example, supporting an 8K TV will be very difficult with wires longer than a few feet. In the short term the fiber will be “dark”, but you’ll be glad to have it in place as speeds bury copper wire in the dust of obsolete technology. For TV and computer work station locations, also pull an optical fiber to a service location where the network equipment will be installed. Wired is always faster and more reliable than wireless. Since this is new construction, I recommend installing network jacks in each room - similar to how you will install power outlets everywhere. In any case I recommend providing a network connection for each AMP. Typically, all of the AMP’s would be located in the same spot, but this is not required with a SONOS system. Speakers are wired to their room’s Volume control. I recommend a “home run” wire from each control to its AMP. If you install an “impedance matching” control in each room, you can configure them to allow connecting three pairs of speakers to AMP. In any case, you will want to be able to individually adjust room Volume.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |